Minutes, IBIS Quality Committee 04 August 2009 11-12 AM EST (8-9 AM PST) ROLL CALL Adam Tambone Anders Ekholm, Ericsson Barry Katz, SiSoft Benny Lazer Benjamin P Silva Bob Cox, Micron * Bob Ross, Teraspeed Consulting Group Brian Arsenault David Banas, Xilinx * Eckhard Lenski, Nokia Siemens Networks Eric Brock Guan Tao, Huawei Technologies Gregory R Edlund Hazem Hegazy Huang Chunxing, Huawei Technologies John Figueroa John Angulo, Mentor Graphics Katja Koller, Nokia Siemens Networks Kevin Fisher Kim Helliwell, LSI Logic Lance Wang, IOMethodology Lynne Green * Mike LaBonte, Cisco Systems Mike Mayer, SiSoft * Moshiul Haque, Micron Technology Muniswarareddy Vorugu, ARM Ltd * Pavani Jella, TI Peter LaFlamme Randy Wolff, Micron Technology Radovan Vuletic, Qimonda Robert Haller, Enterasys Roy Leventhal, Leventhal Design & Communications Sherif Hammad, Mentor Graphics Todd Westerhoff, SiSoft Tom Dagostino, Teraspeed Consulting Group Kazuyoshi Shoji, Hitachi Sadahiro Nonoyama Liqun, Huawei Everyone in attendance marked by * NOTE: "AR" = Action Required. -----------------------MINUTES --------------------------- Mike LaBonte conducted the meeting. Call for patent disclosure: - No one declared a patent. AR Review: - Mike fix typ/min/max spelling for consistency - Done - Mike fix IQ document to use one space between sentences - Done New items: We looked over editorial changes made by Mike: - It will have to be posted for offline review AR: Mike post IQ 1.1 document with full revision history, plus PDF version Bob motioned that we make the new IQ version 2.0 instead of 1.1: - Eckhard: Second the motion - Roll call vote: Bob: Yes Eckhard: Yes Mike: Yes Moshiul: Yes Pavani: Yes Mike: What should the Revision section look like? - Bob: We can keep the long revision list as our private record. - It is meaningless to those outside the committee. - Mike: It is common to document at least major version changes - We looked at the IBIS summit IQ presentation AR: Mike post IQ 2.0 document with brief revision history section Mike: Should "subparameters" be changed to "sub-parameters"? - Bob: IBIS has gotten this wrong all along (no dash) - It would be best to stay with the incorrect IBIS usage, however - We could define it as a term - We decided not to change "subparameter" or define it as a term Mike: Do we need to define any other terms? - How about "Golden Waveforms"? - Bob: Implementation of this has departed from the IBIS spec - Better not to mention it Mike: What procedure was used to release 1.0? - Bob: The IBIS page points to the Quality page - Mike: The IQ main page has a left side link to a Specification page - It should be fixed to not use a directory listing or frames AR: Mike change web site to avoid using frames Meeting ended at 12:05 PM Eastern Time.